HD LIVE FEED with ONE DSLR CAMERA
-
another solution would be Canon2Syphon, the signal goes out via USB and has no tech data displayed. The resolution is around 1056×704 so that it can go over the bandwidth of USB.
Best,
Michel -
with HDMI, anything over 10 metres is pushing it. i've got a signal booster and a 20m cable, and it doesn't always work - its prone to interference. i also have a twin cat 5 system that'll send 1080p down 40m no problem (except for coiling the cables at the end of the gig)
-
michel. I don't understand what you mean by ' the tech data displayed on the output, like AWB, resolution, framerate etc.' Is this only for a canon 5D, or would I have to install Magic Latern for Nikon D800 as well?
Also I don't understand where what Canon2syphon would be outputting? Where in my chain would it go: DSLR, HDMI, BLACKMAGIC, THUNDERBOLT, ISADORA, OUTPUT TO PROJECTOR?Thanks so much for you help!jamie -
Canon2Syphon would go like this:
DSLR>USB>Canon2Syphon>Isadora>Output to Projector -
-
Thank you Michel and MattewH.
-
Michel. Will all the tech data be seen with a blackmagic device?
Jamie -
The data is sent with the HDMI signal, so I would say yes, because it's part of the videostream.
If I were you I would try it with the magic lantern firmware. This is what they say on there website:_Will it break my camera?
As of September 2009 the software has been downloaded over two thousand times and there have been no reports of damage to the cameras. While this is no guarantee of absolute safety, the stable releases have been tested by beta testers. Most of the risk is to the developers' cameras while testing new features and probing new portions of Canon's firmware. By the time the software moves from development to beta testing it has been installed hundreds or thousands of times._
Best,
Michel -
A student here has used the magic lantern software on his camera and said its amazing....
-
Been a problem of mine recently, thank you for this thread tho..
