A good capture device for USB?
-
I did some very unscientific tests a while back, comparing USB input (via Videoglide), Firewire and PCIe and I found that under many circumstances the USB actually had the lowest latency of the bunch.
-
i use a Dazzle with videoglide and have had no problems getting composite signal from a camera 50m away. i also have an easycap, but these can be a bit problematic. particularly because there are a number of different versions that need different drivers, but there's no way of telling them apart, so you don't know which drivers will work until they do or dont.
-
Look this list. It has been updated over the years. For mac though.
[Modul8 v2.5.8+ Video Capture Compatibilty List](http://forum.garagecube.com/viewtopic.php?f=1&t=3951)I use some devices compatible with VideoGlide drivers. I have at the moment EasyCap, but have tried some others as well.Search this for live capturehttp://forum.troikatronix.com/cgi-bin/forum/gforum.cgi?tPS: But for really reliable solution I got Matrox MXO2 mini(connecting with ExpressCard). -
-
dbini, does the dazzle work on a MBP?
Just to check, is this the right thing? http://www.maplin.co.uk/dazzle-dvd-recorder-96885Cheers -
I'd double check what OS it is compatible with too. Mountain Lion still inst that supported; especially not with (dare I say it...) smaller companies.
-
@Bootzilla - that Dazzle looks similar to mine, except mine is all white, with a white cable. there's a few versions, i'm sure the internals are pretty similar, but they come with different software.*
i'm running OSX 10.6.8, and to get the Dazzle to work in Isadora, you'll need a VideoGlide driver - that's an extra $29 from http://www.echofx.com/videoglide.html - sorry i don't know about Mountain Lion.videoglide only supports capture at 640x480 - which is fine for tracking, but might not suit your requirements for a 'reasonable quality' it'll do 25 fps for PAL, 29.97 fps for NTSC. it'll output YUV if that's what you like to work in.*apparently, checking the website, videoglide won't capture audio on the DVC-100 - i'm not sure what model that is on the Maplin website. -
i would just run a LONG BNC and adapt it to RCA and canopus into IZZY
-
Patrick is right -- that's how I've done it in the past, and it works well. You can run a pretty long BNC cable (as long as the cable quality is good) before the signal will degrade appreciably.
Best Wishes,Mark -
+1 I stick to BNC when I can.
Plus BNC booster are not that expensive; lots of second hand ones on good old ebay.
